HCM
VIKING F-2
Delivery time:in stock
TECHNICAL DATA Specifications: Rated to - 175 PSI (12.1 bar) Water Working Pressure. Factory tested hydrostatically - 350 PSI (24.1 bar) with the clapper open. Air pressure to water pressure area differential: Approximately 6 to 1. Material Specifications: Refer to Figure 3. Ordering Information: Part Number - Refer to Table 1 Available Since 2007 Accessories: Note: When viewing this Page online, blue text represents hyper links and will open the desired data page. Model F Dry Valve Conventional Trim Package: For use when the dry valve is used on systems with fresh water supplies. • 3” Part No. 10158 (galvanized steel); For Pretrimmed package, order Part No. 13764PTR • 4” Part No. 08395 (galvanized steel); For Pretrimmed package, order Part No. 13765PTR • 6” Part No. 09456 (galvanized steel); For Pretrimmed package, order Part No. 13766PTR Model F Dry Valve Accessory Package: This package is needed when Viking Trim Packages are not used. • Part No. 08397 Model D-2 Accelerator: • Part No. 09881 Model D-2 Accelerator Trim Kit: Package includes trim components and air gauge required to install the Model D-2 Accelerator • Part No. 09730 Model E-1 Accelerator and B-1 Anti-Flood Assembly Package: Includes Model E-1 Accelerator and Model B-1 Anti-flood Device • Part No. 08116 Model E-1 Accelerator Trim Kit: Package includes trim components and air gauge required to install the Model E-1 Accelerator and B-1 Anti-flood Device • Part No. 08264 (galvanized steel) Additional accessories are available and may be required for operation or supervision. Refer to the system description for complete operating trim requirements. Table 1: Model F2 Dry Valve Part Numbers and Specifications Groove / Groove Description Nominal Size Part Number Friction Loss* CV Factor Shipping Weight Pipe O.D. 89 mm 3" 13764 3 ft. (0.91 m) 800 125 lbs. (57 kg) 114 mm 4" 13765 5 ft. (1.52 m) 821 125 lbs. (57 kg) 168 mm 6" 13766 49 ft. (14.9 m) 780 184 lbs. (84 kg) 165 mm 6" 13767 49 ft. (14.9 m) 780 184 lbs. (84 kg) * Expressed in equivalent length of Schedule 40 pipe based on Hazen & Williams formula: C = 120. Replaces Form No. F_011507 Rev 18.1 (Revised wrench PN.
